584,802 active members*
4,917 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2004
    Posts
    500

    Retract Height

    Hi all,
    I don't know if I just aren't looking hard enough or what, but I haven't found a retract height setting in sheetcam yet. My machine can't go 3 inches above the stock when changing tools and it stalls out the motors. Is it just something simple? I don't know how to change height retract when cutting or when changing tools. Any ideas?
    Thanks.

  2. #2
    Join Date
    Mar 2004
    Posts
    500
    I figured it out. I didn't know it was under material set up.
    Thanks.

Similar Threads

  1. Tool height "touch off" tool unusable
    By DHK in forum DeskCNC Controller Board
    Replies: 6
    Last Post: 05-06-2006, 06:54 PM
  2. text height
    By 47MLB in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 03-17-2005, 12:34 AM
  3. How important is torch height control?
    By mm0015 in forum Waterjet General Topics
    Replies: 4
    Last Post: 08-06-2004, 05:19 PM
  4. Z Axis Height question?
    By redbaron in forum DIY CNC Router Table Machines
    Replies: 4
    Last Post: 02-06-2004, 03:34 PM
  5. Tool Height Offsets
    By JamesBond in forum DNC Problems and Solutions
    Replies: 6
    Last Post: 06-01-2003, 08:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •