[rolltide]

Hey, I'm new to the forum and I'm looking for help with a project. I have a few parts I'm interested in having machined. I have the originals in plastic and could provide google sketchup files of each part (if i can get something to accurately measure with), I just got autocad but I have no experience with it. Here are some pics of the gears I want to have machined. They are pretty small, check ruler in pic for scale.
piece 1

piece 2



here they are together


The next piece I want a quote for is the orange piece pictured below, but it won't be exact to these pictures as I have some small changes in mind for it. For example the outside holes (where you can see the springs) will be around 3/4 in in diameter (and there wont be anything inside like the springs). In its entirety the plate is almost 4 inches in diameter and it's stem is almost 2.25 inches long.



Under what you see here^^ on the same plate there are cyclindrical walls around where the holes will be extending approx 3/4 in.
So roughly it is 3in tall and 4in in diameter.

I think thats it for now. I'll try to get some sketchup files made, but if it would be easier to send the parts in and have them measured and designed in house that's cool too.
Thanks

[Dualkit]

Check your private messages.

[rolltide]

Pm'd all back. keep them coming, thanks!