For Amada fbd 5020 brake press. Does anyone have a retrofit controller for this unit or a electrical schematics for this controller? The controller shows an error message and will not power up the machine... Thanks.
Results 1 to 1 of 1
-
07-15-2010, 11:32 PM #1
Registered
- Join Date
- Jul 2010
- Posts
- 0
Amada brake press controller nc9 r
Reply With QuoteSimilar Threads
-
Amada Press Brake Controller problem
By jamesbond007 in forum Bending, Forging, Extrusion...Replies: 4Last Post: 12-29-2018, 03:38 AM -
Looking to buy Used Press Brake
By magma-joe in forum Bending, Forging, Extrusion...Replies: 5Last Post: 01-16-2012, 09:05 PM -
Selecting Press for home shop press brake
By tikka308 in forum Bending, Forging, Extrusion...Replies: 0Last Post: 12-29-2009, 05:51 AM -
Press Brake
By davesnd in forum CamSoft ProductsReplies: 0Last Post: 12-02-2009, 07:11 AM -
NorthStar Press Brake For 20 Ton Shop Press anyone ever use one?
By dsmdude in forum Bending, Forging, Extrusion...Replies: 6Last Post: 04-13-2007, 10:01 PM
Posting Permissions
