584,805 active members*
4,854 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > CNC Machine Related Electronics > MEI LC/DSP Prof. Motion Control. Wo helps me on: Software and drivers?
Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2005
    Posts
    25

    MEI LC/DSP Prof. Motion Control. Wo helps me on: Software and drivers?

    Hello guys,

    I've a question to for all guys who worked with de MEI Motion Engineering Inc. Motion controllers.
    http://www.motioneng.com/dsp_series.html

    I'm searching for drivers and software for the LC/DSP 4 axis ISA card.
    This is the one i tolking aboud:
    http://www.motioneng.com/dsp/lcdsp.html


    Is there anybody who have the smollest disks of software for me?
    Ore is there anybody who have had experiense with this card?


    It's a professional motion controlling card. It drives servo's and steppers up to 8 motors. Even with tachometre feedback. De card is drived by your host computer in a single ISA slot on your motherboard (mobo). The card is driven by 8 frames with has multiple coördination points to it. The card can be programmed by C.

    Very thanks by forehand!
    Cheers,
    Harmen.

    (Sorry for my bad Englisch)

  2. #2
    Join Date
    Jul 2005
    Posts
    25
    Nobody has experions and software fot the MEI LC/DSP?

  3. #3
    Join Date
    Nov 2007
    Posts
    4
    Hi everybody,
    I'm searching for drivers and software for the LC/DSP 4 axis ISA card, too.

    Any idea ?

    Best regards,
    gompaa

  4. #4
    Join Date
    Aug 2010
    Posts
    0

    mei lc/dsp

    I'm searching for drivers and software for the LC/DSP 4 axis ISA card.

    Is there anybody who have the smollest disks of software for me?
    Ore is there anybody who have had experiense with this card?

Similar Threads

  1. recomend cad/cam software for sculpture prof
    By bfreedland in forum Uncategorised CAM Discussion
    Replies: 3
    Last Post: 11-04-2006, 06:16 PM
  2. Drivers & software
    By willy in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 07-02-2006, 12:27 PM
  3. Pneumatic Motion Bed Control
    By ScottDean1982 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 19
    Last Post: 06-12-2006, 01:15 PM
  4. experience with PMD motion control chipsets
    By margni74 in forum CNC Machine Related Electronics
    Replies: 0
    Last Post: 12-29-2003, 01:55 PM
  5. good papers about motion control
    By bunalmis in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 08-07-2003, 12:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •