[salvadoralvarez]

Hello,
I have 2 questions, first: We have a horizontal Machining center 60HB with a U100 control. We want to dripfeed to it using Predator DNC, the machine already has the DNC-B option, my question is: Has anyone conocted something like this using predator? what configuration you used on the Predator and on the machine?

The second question is about a Captain 470 LM lathe, it has a E100 control and I'm wondering if you can add the DNC-B option to them or you can dripfeed without it. Also do you know any CAM software for a lathe with milling option like this one?

Thanks

[dcoupar]

1. Yes, Predator DNC does support Okuma DNC-B.
2. I'm pretty sure you can add DNC-B to the E100, and you can't drip-feed without it.
3. Look at Esprit SolidMillTurn.

[salvadoralvarez]

Thanks,
They had told me Predator DNC supports Okuma B transfers, but, Does anyone have a configuration for the Predator Command? Which objects to use, and what values to set?

Thanks in advance

[dcoupar]

What version of Predator are you running?

[salvadoralvarez]

Predator DNC 2009