584,808 active members*
5,139 visitors online*
Register for free
Login
Results 1 to 9 of 9
  1. #1
    Join Date
    Apr 2010
    Posts
    0

    PARAMETER MAZAK SLANT TURN 30 WITH MAZATROL T1

    Hello ,
    I am a beginner for the CNC Machine and Just Bought used MAZAK SLANT TURN 30 UNIVERSAL WITH MAZATROL T1 CONTROLLER.
    The Battery died and all the Parameter are Loss.
    Please any one help me to provide the Parameter List for this Machine .
    Thank You ,
    Tonny

  2. #2
    Join Date
    Dec 2003
    Posts
    24216
    Send me an email address by PM and I can send what I have.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  3. #3
    Join Date
    Apr 2010
    Posts
    0

    Parameter Mazak Slant Turn 30 Universal 1500

    Thank you Al .
    my email address : [email protected]
    Please also provide the OP Parameter.

  4. #4
    Join Date
    Apr 2010
    Posts
    0
    Thank you for the Parameter .
    I have loaded all parameter you provide to me but have problem with the tool change .
    The Tool Clamp can not clamp I think have some parameter are miss.
    please advise,

  5. #5
    Join Date
    Dec 2003
    Posts
    24216
    This is all I have otherwise.
    Al.
    Attached Files Attached Files
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  6. #6
    Join Date
    Apr 2010
    Posts
    0
    Al,
    The first I loaded QT10 Parameter the spindle can run properly and no alarm appear on the screen but the Turret is always turn if I push the Tool Change Button ,after I loaded your Parameter the spindle have a problem over load alarm appearon the screen ,I change again the Parameter with QT10 but not working the spindle always trip alarm appear on the screen overload.
    Why ????

  7. #7
    Join Date
    Apr 2010
    Posts
    0
    Hello Al,
    Now the Machine can Run Manualy the spindle and both axis can working properly but when I trun to run the Program appear alarm on the screen 101 Missing condition.
    I have register the tool .
    Please give me some advise this problem.

    Thank you

  8. #8
    Join Date
    May 2010
    Posts
    0
    I would also be greatfull if someone could let me have a copy of the parameter list

    Thanks

    Toby

  9. #9
    Join Date
    Aug 2010
    Posts
    0

    T1 Parameters please

    Can someone help me with the Chuck Barrier, T data, T Set data for the T1. Having a hard time setting up the machine. Thanks.

Similar Threads

  1. Need help with Mazak Slant Turn 15 Univ. / Mazatrol T1'
    By Haaatschi in forum Mazak, Mitsubishi, Mazatrol
    Replies: 28
    Last Post: 04-11-2021, 01:33 PM
  2. MAZAK SLANT TURN-28
    By CHANDRU in forum Mazak, Mitsubishi, Mazatrol
    Replies: 4
    Last Post: 04-09-2010, 10:45 AM
  3. MAZAK QUICK SLANT 20N MAZATROL CAm T4
    By jlviloria in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 09-07-2009, 03:14 PM
  4. MAZAK : SLANT TURN 40N / T-PLUS / 33 EMG STOP
    By iNUC in forum Mazak, Mitsubishi, Mazatrol
    Replies: 2
    Last Post: 03-29-2009, 04:26 AM
  5. mazak slant turn 40n
    By intermax in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 07-04-2007, 09:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •