I have upgraded my lathe module to version 10 and for some reason every arc that I produce G-code and then open in Flashcut, turns into an arc-complement/concave radius. Is there a setting that needs to be fixed?
Thanks!
Results 1 to 3 of 3
-
08-11-2010, 04:58 PM #1
Registered
- Join Date
- Aug 2007
- Posts
- 4
Problem with turning arcs in Flashcut
-
09-03-2010, 01:40 PM #2
Registered
- Join Date
- May 2004
- Posts
- 21
Flashcut arcs - v10
You need a post upgrade / modification.
Send me a copy of your Flashcut post and I will implement mods.
michael
Dolphin CAD CAM Systems LtdDolphin CAD CAM Ltd
-
09-03-2010, 01:41 PM #3
Registered
- Join Date
- May 2004
- Posts
- 21
flashcut upgrade
You need a post upgrade / modification.
Send me a copy of your Flashcut post and I will implement mods.
michael
Dolphin CAD CAM Systems LtdDolphin CAD CAM Ltd
Reply With QuoteSimilar Threads
-
Autocad to Mach3 problem with arcs
By LTP in forum Mach LatheReplies: 3Last Post: 07-25-2010, 03:08 PM -
Huge Problem with Turning Arcs HELP
By Cartierusm in forum Dolphin CAD/CAMReplies: 12Last Post: 06-11-2009, 01:40 AM -
Fanuc 10M feed problem in arcs
By AMEG CNC in forum FanucReplies: 4Last Post: 02-07-2007, 12:58 PM -
dxf file import problem with Flashcut CNC
By oakcnc in forum Uncategorised CAM DiscussionReplies: 1Last Post: 01-17-2007, 05:06 PM -
lines-arcs vs spline problem
By metlcutr55 in forum Uncategorised CAM DiscussionReplies: 1Last Post: 07-07-2006, 04:16 PM
Posting Permissions
