yep, i might ask from there. i got e-stop working easily but for some reason not for the other switch. For limit switches you did not have to use any pull-up resistors or so?
Results 21 to 27 of 27
-
10-04-2010, 06:54 PM #21
Registered
- Join Date
- Feb 2009
- Posts
- 9
-
10-04-2010, 06:57 PM #22
Registered
- Join Date
- Aug 2010
- Posts
- 0
No the board provides pull-up resistors and opto-isolation for those 4 pins.
Originally Posted by karri
-
10-04-2010, 09:27 PM #23
Registered
- Join Date
- Feb 2009
- Posts
- 9
I changed p13 -> p12 and it works...quite strange. Does it mean that the Opto for pin 13 is broken?
-
10-04-2010, 09:31 PM #24
Registered
- Join Date
- Feb 2009
- Posts
- 9
yep, i might ask from there. i got e-stop working easily but for some reason not for the other switch. For limit switches you did not have to use any pull-up resistors or so?
-
10-04-2010, 09:36 PM #25
Registered
- Join Date
- Feb 2009
- Posts
- 9
I changed p13 -> p12 and it works...quite strange. Does it mean that the Opto for pin 13 is broken?
-
04-28-2011, 02:59 AM #26
Registered
- Join Date
- Jan 2011
- Posts
- 0
How is this board going for those who uses it? I'm looking at getting one too but I've found a tons of problems this TB6560 board have. :O
Thanks in advance.
-
04-28-2011, 08:14 PM #27
Registered
- Join Date
- Feb 2009
- Posts
- 9
save your money
and buy gecko g540, it is a good and reliable 4-axis driver and I can recommend it 100%.
Karri
Reply With QuoteSimilar Threads
-
Limit switch replacement with proximity switch?
By Normsthename in forum Bending, Forging, Extrusion...Replies: 3Last Post: 07-11-2009, 04:38 PM -
limit switch- home switch
By normd in forum CamSoft ProductsReplies: 1Last Post: 05-17-2008, 12:56 AM -
limit switch and home switch setup
By Runner4404spd in forum CNC Machine Related ElectronicsReplies: 0Last Post: 12-15-2005, 02:58 PM -
Limit Switch / Home Switch in Software
By Sanghera in forum CNC Machine Related ElectronicsReplies: 6Last Post: 11-02-2004, 12:58 AM
Posting Permissions
