584,814 active members*
5,111 visitors online*
Register for free
Login
Results 1 to 8 of 8
  1. #1
    Join Date
    Aug 2010
    Posts
    0

    Talking Charmilles Robofil 510 Aux codes

    Does anyone have a list of Aux codes for the Robofil 510? I am especially looking for the code to bring the pumps from sleep mode. Cheers.

  2. #2
    Join Date
    Jan 2006
    Posts
    104
    AUX,89

    AUX,90


    one is pumps on and the other is pumps off.

    can't remember which one is which.

    the pumps off has like a 20 second delay before turnig them off, so please be patient.
    the pumps on is instantaneous.
    Registered Linux User #348337
    EMC2 Rocks!!!!

  3. #3
    Join Date
    Aug 2010
    Posts
    0
    Thanks for that. I'm sorted.
    Out of interest does anybody have the full set of codes??

  4. #4
    Join Date
    Jul 2009
    Posts
    12
    Quote Originally Posted by tallenttoolroom View Post
    Does anyone have a list of Aux codes for the Robofil 510? I am especially looking for the code to bring the pumps from sleep mode. Cheers.
    I can fix you up.

    Send me an e-mail address and I will send it over.

    While I am in the book, anything else you need?

    Dale Crisp

    [email protected]
    www.edmwirecraft.com

  5. #5
    Join Date
    Sep 2010
    Posts
    72
    Which control does your 510 have?

  6. #6
    Join Date
    Aug 2010
    Posts
    0

    Robofil 510

    Sorry i don't know which version controller we have. How will i find out?

  7. #7
    Join Date
    Sep 2010
    Posts
    72
    You will have either the Fanuc made "Millenium" controller or the Charmilles made "Console 2' controller.

    If you do not see "Fanuc" on any of the boot screens it should be the "Console 2".

    However, I wouldn't bet money on it as there do seem to be some differences between US and European machines even with the same controllers.

    On our "Console 2" machines the MDI command "AUX, 50" turns the pumps off and "AUX, 51" turns the pumps on.

    Our "Millenium" machine will accept the same "AUX" commands as the "Console 2" machines but also has it's own specific commands for the same functions.

  8. #8
    Join Date
    Apr 2020
    Posts
    1
    Quote Originally Posted by kip0569 View Post
    I can fix you up.

    Send me an e-mail address and I will send it over.

    While I am in the book, anything else you need?

    Dale Crisp

    [email protected]
    EDM Wirecraft - Wire EDM Job Shop



    I'm looking for those commands for months can you please send them to me ?

Similar Threads

  1. Charmilles Robofil Wire Edm
    By sundara in forum EDM Discussion General Topics
    Replies: 12
    Last Post: 08-01-2017, 09:56 PM
  2. DNC CHARMILLES ROBOFIL 310
    By tecnomaqq in forum EDM Discussion General Topics
    Replies: 0
    Last Post: 01-17-2014, 04:34 AM
  3. charmilles Robofil 190 or charmilles Robofil 290
    By Fontez in forum Post Processors for MC
    Replies: 0
    Last Post: 03-12-2013, 04:48 PM
  4. Charmilles Robofil 200 programs
    By Shawn Lucas in forum EDM Discussion General Topics
    Replies: 9
    Last Post: 04-02-2012, 10:07 AM
  5. New software for Charmilles Robofil 510
    By tallenttoolroom in forum EDM Discussion General Topics
    Replies: 2
    Last Post: 02-09-2011, 07:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •