584,829 active members*
5,175 visitors online*
Register for free
Login
Results 1 to 7 of 7
  1. #1
    Join Date
    Aug 2010
    Posts
    0

    Help with ie900; Ayuda con ie900!

    hello all...
    I just bought a machine ie900 of China. Already installed it.

    In test mode the laser works, but when I send something with the 5.1 LaserCut machine only moves but not cut (no laser).

    I'm tired of asking for help to the people of China but they don't solve anything, they tell me that if everything is properly connected the computer should work.

    Any suggestions? I have to adjust something in the software settings in LaserCut 5.1?

    I'm using XP

    I'm from Mexico

  2. #2
    Could be speed (feed rate) too slow or laser power set too low.

    Tweakie.
    CNC is only limited by our imagination.

  3. #3
    Join Date
    Feb 2005
    Posts
    124
    That's the exact problem I have with my machine. I'm also using lasercut software and when I set the feed rate to 10 it just doesn't turn on the laser. Around speed 20 the laser turns on. Is this a bug or did they program it with a reason?!

    Very annoying because acrylic only cuts nice at low speeds!

  4. #4
    Join Date
    Aug 2010
    Posts
    0
    I hope somebody can help me... this captures are from my settings... What i'm doing wrong?






  5. #5
    Join Date
    Jan 2006
    Posts
    47
    What percentage of power did you use for the cutting or engraving layer?

    I've noticed that most china-lasers don't have output when you are below 18-20% power.

    Check the power-settings on the display of your machine as well! I had some stupid problems at first, when the corner-power setting was at 7% on machine-display.

    Even when you output 100% through lasercut-software the machien was not outputting more then 7% of this 100%



    Sorry misread your post, now i see that the tube won't fire when speed is to low,

  6. #6
    Join Date
    Jan 2006
    Posts
    114

    Smile

    Hello Armaram,
    can you place a picture of your laser control panel?
    Is it with a display?

    Pierke

  7. #7
    Join Date
    Jan 2006
    Posts
    114

    Smile

    Hello Armaram1,

    is your machine running now?
    Problem is solved??

    Pierke

Similar Threads

  1. ayuda!!!!!!
    By victorcnc in forum Spanish
    Replies: 2
    Last Post: 05-13-2012, 10:25 PM
  2. Ayuda
    By engran in forum Spanish
    Replies: 12
    Last Post: 04-22-2008, 01:19 AM
  3. Ayuda !!!!!
    By nelfra in forum Spanish
    Replies: 5
    Last Post: 09-13-2007, 02:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •