[PlasmaCraft]

This forum has been created for general Q & A on CNC plasma and Oxyfuel Cutting machines of all types. Here we can help you with any trouble shooting questions you may have or onsite assistance if you feel that is what is required.

So, Ask away! I hope we can help you out in whatever you may need.

Jonathan White
President
PlasmaCraft, Inc.
www.plasmacraft.com
[email protected]

[jimcolt]

If anyone can help out with CNC thermal cutting.....Jonathan can. He is one of the best!

Jim Colt Hypertherm

[PlasmaCraft]

Thanks Jim! You have a Great Day!!

[kakashi]

Hi Jonathan!
Please help me about this issue, Thank you thank you so much!
We problem, when we start cutting, the cut Head will go down , touch to material and go up, then plasma will spray for cutting. But Plasma spray a little, machine can not maintain the plasma spray, then Cut head go up and STOP.
After that, we turn off the machine many times and it can work, but for 15 mins, the problem happens again!
We checked all the cable which is fixed in machine, ground.
We use 100Amp, machine work normally, problem just happen with 200Amp.
Who know about this issue, please help me. Thank you so much!
Kakashi!