585,712 active members*
4,233 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Haas Machines > Haas Mills > Unplugged Spindle Fan on 2006 VF2, cant remember which plug to plug it back into..

Thread: Unplugged Spindle Fan on 2006 VF2, cant remember which plug to plug it back into..

Results 1 to 3 of 3
  1. 08-20-2010, 06:14 AM #1
    locash
    locash is offline Registered
    Join Date
    Aug 2006
    Posts
    69

    Unplugged Spindle Fan on 2006 VF2, cant remember which plug to plug it back into..

    Long story short, removed the spindle fan and z axis cover on my late 2006 VF2 to replace the coolant hose that sprung a leak, and wasnt paying attention to which 4 wire connector I unplugged the spindle fan from.. There are two of them on a gold colored plate at the top of the Z axis..

    By the way, the service manuals for these machines are pretty crappy, I feel like they were a waste of $100.
    Reply With Quote Reply With Quote
  2. 08-20-2010, 06:32 AM #2
    GermanTec
    GermanTec is offline Registered
    Join Date
    Aug 2010
    Posts
    0
    If you look from the front of the machine, it must be the upper connector on the right side from the plate.

    But it's not dangerous to test, wich one it's the right. Put the fan in and start the spindle. You must wait some minutes before the fan is running.
    The most dangerous phrase in the language is:"we've always done it this way."
    Reply With Quote Reply With Quote
  3. 08-20-2010, 06:41 AM #3
    locash
    locash is offline Registered
    Join Date
    Aug 2006
    Posts
    69
    Thanks! What is the other connector for?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. PLUG WIRES
    By gabedrummin in forum I.C. Engines
    Replies: 3
    Last Post: 03-25-2011, 09:17 PM
  2. A Sketchup 3D CAM plug in...
    By Chyn2000 in forum Uncategorised CAD Discussion
    Replies: 28
    Last Post: 07-07-2010, 12:40 AM
  3. Material to cut plug from?
    By sco in forum Australia, New Zealand Club House
    Replies: 13
    Last Post: 06-12-2008, 10:21 PM
  4. Ready to use and plug
    By automationtechinc in forum Automation Technology Products
    Replies: 6
    Last Post: 04-06-2008, 05:25 AM
  5. IMservice plug
    By cncadmin in forum Community Club House
    Replies: 0
    Last Post: 11-24-2004, 07:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules