Anybody got the programming manual for the DM2400? Maybe just a walk thru of the steps? Most of the prompts seem straight forward but some real info would be great. Thanks.
Anybody got the programming manual for the DM2400? Maybe just a walk thru of the steps? Most of the prompts seem straight forward but some real info would be great. Thanks.
Never mind I found them. It sure seems easy to understand. What am I missing?
Where did you find the manual? Just got one from a college today (storeroom relic) to them but I have no info or software. Will mastercam work with it?
A fellow member here on the zone had it posted. Is your manual different from the user and service manual. Is it specific to the software only? 188 pages?
I have no manual at the moment and am looking for info. Do you know how to put into demo mode on the keypad?
http://www.dyna-myte.com/files/chptr13.zip
This is a link from another thread. See if it works. I will find the specific pages. What does it do upon powering up?
I do have the service manual for it on a thumb drive. Though I think I found most of it here on the zone. Do searches on the DYna, Dm 2400 etc. I find many conversions and info continuously.