584,817 active members*
5,215 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2005
    Posts
    1268

    Electro-Craft Motors

    I just received some servos from Ebay made by Electro-Craft and do not know what I have. I've been to the EC site and it was not much help for my novice mind. Can someone help with the specs for Electro-Craft Model 0586-00-012, SN H00776 Described on the motor as a PErmanent Magnent Servo-Tach. Is there a way I can test them and determine what I have. I've ordered encoders to place on them for a CNC project and hope I'm not jumping the gun. Thanks in advance.
    Bill in Spartanburg :violin:

  2. #2
    Join Date
    Jun 2003
    Posts
    866
    did you find a spec sheet for the motor?

    On edit: I have an ElectroCraft motor with a similar label. It has a tach which I am going to replace with an encoder. Mine is an E series, P/N E728 39 003. Sorry for the bad information prior to the edit.

Similar Threads

  1. Staggering motors
    By viktorcnc in forum Stepper Motors / Drives
    Replies: 14
    Last Post: 10-25-2015, 08:11 PM
  2. Does anyone know of a controller board for synchronized stepper motors
    By Yellowbeard in forum Stepper Motors / Drives
    Replies: 2
    Last Post: 04-04-2005, 05:06 AM
  3. Looking for controller board for synchronized stepper motors
    By Yellowbeard in forum CNC Machine Related Electronics
    Replies: 0
    Last Post: 04-02-2005, 03:50 PM
  4. Need help with staggering motors
    By viktorcnc in forum CNC Machine Related Electronics
    Replies: 0
    Last Post: 07-05-2004, 10:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •