[maddog1927]

I just got a dm4400 and I have some questions I hope you guys can help me with.

1) What ever happened to the dyna mechtronics yahoo group?

2) It came with a rotary phase converter (andersonconverters.com) 10 HP. Anderson makes CNC and non CNC converters. The converter that it came with is NOT the cnc converter, but it is my understanding that this converter was used with the machine.

Any thoughts on wether the machine may have been / will be damaged using this converter.

3) the converter puts out 120, 120, 220. any idea which lug I should connect the 220 leg to?

Thanks

[Fastest1]

Congratulations on the machine. Caprirs used to work for Dyna, he will probably be able to chime in on it.

[Fastest1]

The Dyna group at Yahoo is still around though it is a little quiet as of late

Congratulations on the machine. Caprirs used to work for Dyna, he will probably be able to chime in on it..

[2ferrous]

Where did you find it?

I'm looking for another so I'm trying to find out where they're all hiding....

Timothy

[maddog1927]

Mesa, Arizona.