Hi Guys,

I'm trying to program a radius at the end/shoulder X-.500 Z-1.00 and can't seem to make it work out and get errors. I'm not using CC, just add the TNR .032 to the programmed radius.

Its just a simple second op so no great precision required.

Any thoughts?

00095
N01 (1/2-20 MALE)
N02 (7/8 12L14)
N03 (1.5"X1.0"THREAD)
N10 G90 G95 G97
N20 G5 S2500 T08.08 M3 M8 (ROUGH TURN)
N30 G53
N40 G0 X-.750
N50 Z .100
N60 G1 Z-.995 F.003
N70 G0 Z.100
N80 X -.555
N90 G1 Z -.999
N100 G0 Z.100
N120 G1 X.065 F.005
N130 G39 R.085 X -.500 Z0
N140 X -.500 Z -.790
N150 G36 R.105 X -.725 Z -1.00
N160 G36 R.050 X -.880 Z -1.150
N170 G0 X -.900
N180 Z1.0