Surely it is not loose. It was damaged somehow. But interestingly there is a voltage change on stepping (if selected) although stepper is not moving.
Anyway, thanx for your help.
Results 1 to 20 of 900
Threaded View
-
09-23-2010, 08:44 PM #11
Registered
- Join Date
- May 2010
- Posts
- 0
Reply With QuoteSimilar Threads
-
Chinese 3 Axis TB6560 & 300oz @ 24V too slow and not enough power
By KallDall in forum Stepper Motors / DrivesReplies: 12Last Post: 09-28-2016, 06:20 PM -
New (red version) of TB6560 chinese driver board
By hspalm in forum Stepper Motors / DrivesReplies: 19Last Post: 02-23-2014, 01:34 AM -
soc-robotics MK4cp OR chinese TB6560 driver
By 24ariel3 in forum Stepper Motors / DrivesReplies: 2Last Post: 04-09-2013, 04:24 AM -
Maximum Voltage with Chinese TB6560
By riphet in forum Stepper Motors / DrivesReplies: 9Last Post: 10-16-2012, 05:29 AM -
Just got my updated super Pid controller
By msimpson99 in forum DIY CNC Router Table MachinesReplies: 13Last Post: 12-22-2010, 10:35 AM
Tags for this Thread
Posting Permissions
