Been having problems with 1185 collision detection alarm, 1081 inverter overcurrent alarm and when the machine sets over time we will get a 1209 current alarm. We have repalced the power supply thinking this was our problem. NOT!
Any suggestions?
Been having problems with 1185 collision detection alarm, 1081 inverter overcurrent alarm and when the machine sets over time we will get a 1209 current alarm. We have repalced the power supply thinking this was our problem. NOT!
Any suggestions?
remove a few way covers see if you can spin the ballscrews by hand with no binding and check that your getting way lube on all ways