[fruivo]

Hi All


I need some help to finishing my Pp for this machine:
-- Deckel MAO DMU80 Monoblock 5 axis continuos and indexed.
( C in the table and B in the head)


For 5 axis continuos it is ok

but for 5 axis indexed need some modifications, can someone show me a good PP? a little program to make one drill or pocketing!! I use the "Spatial Plane".

I have some doubts in approach/retracts with RTCP...

Thanks...


Best Regards

[andrenxcam]

whats the system cam you use..

i've postprocessor this machine ....but ... is NXCAM ..

i used cycle def 19 / M128 plane spatial i'm not recomended.

[sohail abbas]

Tommor i will send you the sample program with plan spatial angle, spatial angels are the advanced form of cycle 19, any way i will send you both of th programs.

sent me you email.

[andrenxcam]

HELLO MY EMAIL Sohail is [email protected]
I USE THE CYCLE DEF 19 INSTEAD OF PLANE SPATIAL
I know well this CONTROL PLANE SPATIAL BUT I STILL PREFER THE CYCLE 19 AND M128 BUT IF YOU CAN SEND ME SOME EXAMPLES NO PROBLEM ..
HUG !!!!
VISIT MY WEBSITE cadcamnx

[fruivo]

Hi andré

I sent to you a example (to your e-mail), if you could help me I would be grateful.
Thanks...

Best Regards