I have a rover and would like to know if and where one could get the drivers and parts to add a c axis. I was told the machine is prewired. Thanks for the help
Chuck
I have a rover and would like to know if and where one could get the drivers and parts to add a c axis. I was told the machine is prewired. Thanks for the help
Chuck
Unless you can find a machine coming out of service on line or at an auction, Biesse and or Yaskawa. Depending on what you want to do, an alternative would be to purchase the fixed spindle plate ( electrospindle must be able to receive this ), these allowed you run aggregates at 90 degree poistions only, although I have machined one to degrees other than 90. They are static, once mounted there are fixed slots for the aggregate anti-rotation pins to go. If you need anymore help let me know.
www.cnccustomservices.com
Mark T.