584,846 active members*
4,124 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2010
    Posts
    34

    Angry problem tx8f control parameter codes?

    Hello i have a traub tnd 350 g with tx8f control and need to find out how to gain access to the parameters to switch off the second spindle does any one know anything about this machine or control?

  2. #2
    Join Date
    May 2020
    Posts
    4

    Re: problem tx8f control parameter codes?

    Anyone please help me with original parameters for TND 350 G. email [email protected]. urgently required. machine is standing ideal since last six months.

Similar Threads

  1. Parameter help on 11t control
    By YV600 in forum Fanuc
    Replies: 1
    Last Post: 03-06-2010, 01:19 AM
  2. free software that can convert g codes to heidenhain control...
    By 050177e in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 6
    Last Post: 07-31-2009, 01:27 PM
  3. Problem with Turbocadcam Pro V14 when sending G codes to Prototrak MX2
    By GM CNC in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 06-16-2009, 09:58 PM
  4. Work coordinate additional G codes parameter
    By djmcdaris in forum Fanuc
    Replies: 2
    Last Post: 02-27-2008, 10:41 PM
  5. What m-codes control relay outputs in mach3?
    By jedcam67 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 10-23-2007, 02:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •