[rem100wm]

Hello to all

Well I need to ask of any body here knows the size of the belts for the Dyna 4x4 Router/plasma machines? Or where to get replacements for them?

Mine are starting to need to be replaced but Dyna is dead and those guys didn't included manual with their machines.

Thanks
Rem

[Torchhead]

They are probably "XL" series of belts (that is mostly what they used. XL is a .2" (about 5.08mm) pitch. All you need to do is measure the width then count the grooves. Most standard width is 3/8" or 1/2". Multiply grooves X .2 to get the belt length in inches and multiply that times 25.4 to get the belt length in MM. Once you know the series belt and width you can select the length belt you want. Several CNC Zone advertisers stock XL series belts.

TOM caudle
www.CandCNC.com

[rem100wm]

Hello to all
Thank You for the reply Tom
Now, can You recommend any of the suppliers?
Thanks again
Rem