We have a QT8 lathe with the T2 controller. The prox. switch for the tool eye (in the home position) is bad.
Can you disable the parameter that verifies the position so I can turn the spindle on? Right now it will not allow us to turn on the spindle, because it does not recognize the arm is in the home position.
Results 1 to 1 of 1
-
03-28-2011, 10:22 PM #1
Registered
- Join Date
- Nov 2005
- Posts
- 116
Tool Eye Parmater - Mazak T2 Controller
Reply With QuoteSimilar Threads
-
Mazak QT-8 with a T32B controller need help
By Captdave in forum Mazak, Mitsubishi, MazatrolReplies: 3Last Post: 02-18-2011, 04:18 PM -
MAZAK HMC with M32 CONTROLLER
By rajesh_1355 in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 02-18-2011, 04:15 PM -
Connecting DNC OR CMT to a mazak m-32 controller
By toolmaker23 in forum Controller & Computer SolutionsReplies: 0Last Post: 03-12-2010, 07:32 AM -
Mazak VTC-41 Controller cards
By Aussie_guy00000 in forum Mazak, Mitsubishi, MazatrolReplies: 11Last Post: 10-04-2006, 05:42 AM -
Mazak V-10 with Fanuc 7M Controller
By Doubleddaved in forum FanucReplies: 11Last Post: 04-06-2006, 02:57 AM
Posting Permissions
