584,862 active members*
5,442 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Servo Motors / Drives > Plasma cutting machine CNCTG5000 panasonic driver err49.0
Results 1 to 1 of 1
  1. #1
    Join Date
    Apr 2017
    Posts
    1

    Plasma cutting machine CNCTG5000 panasonic driver err49.0

    I have a plasma cutting machine(CNCTG500 with MicroEdgePro) with 3 servo drivers. A few days ago the torch stopped and i cannot move it manually at all(it shows on the screen CNC rail positioning errror and if I try on the transverse CNC transverse positioning error). The error 49.0 is shown on the driver that belongs to the up and down movement of the torch.(the error code says: bad signal from encoder and replace the motor). The odd thing is the motor don't have an encoder. I've tried to change the cable connections from the third servo driver(with the error) to the first one to check if the driver is damaged. It showed the same error. The torch cannot move on axis only up and down. Please help!
    Attached Thumbnails Attached Thumbnails driver servo.jpg  

Similar Threads

  1. Replies: 7
    Last Post: 06-24-2014, 07:25 AM
  2. Replies: 1
    Last Post: 06-16-2014, 08:15 AM
  3. Replies: 0
    Last Post: 04-28-2014, 09:44 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •