The ball screw and nut have gone bad on my Weeke BHC-550. Does anyone have or know where I can get this part?
Thank you,
Erik
Results 1 to 2 of 2
-
10-01-2010, 07:06 PM #1
Registered
- Join Date
- Jul 2009
- Posts
- 7
Weeke BHC-550 ball screw and nut needed!
-
10-01-2010, 08:17 PM #2
Member
- Join Date
- Jan 2005
- Posts
- 15362
booseman90
Leadscrew International will make or repair your old one
Lead Screws International. Design, Manufacture and Repair of Industrial Screw Assemblies
Another one is International Ball screw
http://www.internationalballscrewrep...com/index.htmlMactec54
Reply With QuoteSimilar Threads
-
what bearing fit with acme screw 1/2 -10(for cheap ball screw)
By apex in forum Linear and Rotary MotionReplies: 4Last Post: 07-27-2007, 05:15 PM -
Belt vrs. Ball Screw vrs. Lead Screw
By stevesplanes in forum Linear and Rotary MotionReplies: 7Last Post: 01-09-2006, 06:23 PM -
New technology.... old debate.....ball screw vs lead screw
By trubleshtr in forum Linear and Rotary MotionReplies: 1Last Post: 08-16-2005, 02:42 AM -
acme screw to ball screw question
By Billw in forum DIY CNC Router Table MachinesReplies: 9Last Post: 07-18-2005, 06:10 AM -
ball screw wipers needed
By replicapro in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 10-20-2004, 12:04 AM
Tags for this Thread
Posting Permissions
