[MSGMachine]

I am looking eather to find a good, or make my own HTML setup sheet for mastercam x4. I what to try and define what i need and setup the sheet to only spit out what i need. has anyone out there done this that can give me some pointers or advice on how to go about doing this?

I would like to learn the best way to use this and any input is needed on where to start.

[Jhjr]

Go to emastercam.com. In the forum there is a sticky in the main mastercam forum called download x+ or x+ something. It's a great HTML setup & tool sheet. It's fully customizable. Follow the instructions that are given in the thread because the original program is in german & you have to do an extra step to get it to work in English. NBD though, not hard to do & it's a killer setup sheet. The forum will be closed for another day or so due to an upgrade to the site.

[Jhjr]

Go to emastercam.com. In the forum there is a sticky in the main mastercam forum called download x+ or x+ something. It's a great HTML setup & tool program that gets info from mastercam. It's fully customizable. Follow the instructions in the thread cause the original is in German & takes an extra step to get it into English. Nbd though & it's a killer setup sheet program. The site will be closed for another day or so due to an upgrade to the forum.

[Derek Goodwin]

Here you go, full download and instructions for the X+ setup sheet for Mastercam

[cad01]

or you can create your own using activeX reports

[Mike Mattera]

Do you know HTML already? Making a post spit out HTML isn't easy. I have one I wrote for V7 and it still works pretty well. You wouldn't be able to customize it without a knowledge of the Post language and HTML language.

Mike Mattera