Hello..
Can anyone help with a postprocessor for Alphacam......
your help appreciated..
cheers
Frans
Hello..
Can anyone help with a postprocessor for Alphacam......
your help appreciated..
cheers
Frans
I have been trying to figure out a few things about AlphaCams post processor lately also.
I think Frans got a post from Bob Campbell.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I can do them.
But I do charge - relatively inexpensive when compared to vendor prices.
Interested? I will need to know machine, control and basic axis configuration.
Andy NC
Andy
Originally Posted by Andy NC
How much is it for a postprocessor Alphacam to NUM750 ??
Hi,
£200 GBP NC code will be perfect (i.e. right first time)
Can trade via web and PayPAL for security.
Let me know what you think
Andy
Andy
Can you make me a postprocessor AlphACAM - Record 2 NUM750.
I have the old one made for DOS. Is that of any help ?
Andy NC,Originally Posted by Andy NC
Looking for alphacam post for Anilam 5300 Mk controller .
On standard 3 axis milling MC.
Anilam 5300 Mk controller .
No problem just send me a couple of sample NC programs,
Need to show me a wide range of functions e.g. lines, arcs, drilling/pecking/tapping cycles, radius compensation,
Cost is £200 GBP. Will accept payment via paypal.
Waitng on your reply
Andy NC
Andy
Andy,
You can contact me directly at [email protected]
Can I email sample progs directly to you and arrange payment.
Many Thanks.
andy nc ,
need a post for alphacam to busellato evolution 2.3
email is [email protected]
Salve ho bisogno di un postprocessor per Alphacam
Ho un controllo Siemens Sinumerik 840 di. Puoi aiutarmi.
Andy Whats your email address.
Do you need more details ??
Hello.
I have a problem with the post postprocessor. I am working a pade uni5 with alphacam 2012R2. so when i am working with 5 axis and c axis goes up to 95o the machine stop working.
can anyone tell me which is the command that I have to use in the nc code, in order to change the interpolation of the C and A axis when the machine comes to overstroke and stops running?
I need the command to rotate the C axis to -180 or +180 and at the same time to mirror the A axis.