[Hyrum]

I am in the process of purchasing a new Haas Mini Mill. My MAXNC 10CL has been giving me trouble and I am ready to upgrade to a real machine! A local school purchased this mill but found that the floor that they wanted to put in on could not support the weight. Now I wont have to wait the 6-8 weeks for delivery because their machine will go to me.

I am wondering if I will have any trouble getting it through my garage door. The clearance is 82.5 inches. Will it fit or will I have to remove something from the spindle?

Thanks,
Hyrum Fairbanks PE

[dougtyler]

I had to unbolt the flexible conduit, so that it could layit over, to get my MiniMill in my garage.

[Hyrum]

So it is easy to do then? Does the spindle lay down? Could you provide a little more info? How tall is the entrance into your garage?

Thanks,
Hyrum

[aadrew10]

You have plenty of room to get it in. Put the spindle all the way down, and unhook the flexible conduit and you'll have 3-4 inches clearance. I did the same thing three months ago