584,829 active members*
5,040 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Amada pega fanuc 04pc system error
Page 1 of 3 123
Results 1 to 20 of 43
  1. #1
    Join Date
    Oct 2010
    Posts
    0

    Amada pega fanuc 04pc system error

    please help
    I have problems amada pega 357 04pc
    in turn I get system error
    We have motherboard
    built on and off then comes the turn on
    system error
    how I can

  2. #2
    Join Date
    Apr 2009
    Posts
    1379
    which system error? Are there lights on? Does the screen say anything? Be as specific as possible.

  3. #3
    Join Date
    Oct 2010
    Posts
    0

    system error

    Quote Originally Posted by memoryman View Post
    which system error? Are there lights on? Does the screen say anything? Be as specific as possible.
    yes I have deleted memory
    machine was again 0
    right page button MEMORY TAPE MANUAL EDIT MDI is off
    system restarts
    said parameter active and alarm 417 427 437
    all parameters re-entered
    then I can not disable parameter
    I give 0 not go
    but I have punched tape parameters
    tape reader not funksioniert
    how can I bring back machine run
    Thanks

  4. #4
    Join Date
    Apr 2009
    Posts
    1379
    did you also enter the DIAGNOSTIC (300~650) parameters?

  5. #5
    Join Date
    Oct 2010
    Posts
    0
    DIAGNOSTIC (300 ~ 650) parameter
    I entered manual
    now I've turret and index problems
    alarm in 2000 and 06 interlock
    and no alarm in 2009 how I can
    I need no parameter which
    I have to change parameters

  6. #6
    Join Date
    Mar 2011
    Posts
    0

    Amada Coma with Fanuc 04PC controller

    There are 2 errors which which we are getting with the machine
    No.-222 +Y S LMT

    And when we are correcting that error another error is occurring
    No.-220 +Y OT

    These error are regarding some parameter settings, may be these error relates to PARAMETER numbers 81, 82, 83, 84.

    Can you let us know what this error is and if we can find complete manual which will tell us what to do.

  7. #7
    Join Date
    Apr 2009
    Posts
    1379
    we have no manuals for this control; found a link for saving and restoring macros/data:
    Search Results for FANUC 04PC PARAMETERS.pdf - Download Free Ebooks - EDocFind.com

  8. #8
    Join Date
    Aug 2009
    Posts
    27
    Alarm 222 is software overtravel 'the +Y stored stroke limit has been overstepped'. What condition caused this? Programing error? Jog error while zero referencing?
    Alarm 220 is 'the +Y stroke limit switch has been activated'. In manual mode hold overtravel release until NC Ready indicator is on and jog the Y-axis using -Y jog button. Then reset to clear the alarm.
    Be very cautious about changing parameters. Make a backup of parameters before you change anything. Parameters 82, 83, 84 are gridshift parameters for X, Y, T axis.

  9. #9
    Join Date
    Oct 2012
    Posts
    0

    Amada Vipros 357 versus Amada Pega 357

    Hello,

    I would like to know your opinion on these two machines: Amada vipros 357 and amada pega 357.

    Which one is better, more friendly and easier to manage, less expensive maintenance, etc?

    Thanks!

  10. #10
    Join Date
    Mar 2005
    Posts
    816
    I've never had a vipros only have a pega 344 so I can't tell you about those but I like my amada. It has served me well with the Mate and Wilson brand tooling I bought. I do a lot of flat pattern parts with it

  11. #11
    Join Date
    Aug 2009
    Posts
    27
    The Vipros 357 is my choice.
    The benefits of the PHNC hydraulic control makes for easier setup for marking, forming and embossing tools. The punch hover feature reduces run times on jobs.
    I also have an Amada Vela 355 and Amada Aries 222. I would prefer the hydraulic punching machine instead of the flywheel type.
    Downside is ~ $ 1.5k for filters and oil change each year.

  12. #12
    Join Date
    Oct 2012
    Posts
    40

    Hello, I would like to know your opinion on these two machines: Amada vipros 357 and

    Hi
    As per my opinion you just take a look of AC Servo machine insted of Hydraulic Servo b'coz Ac Servo is better for less power consumption, more productivity, more friendly and easier to manage, less expensive maintenance.

    Regards

  13. #13
    I have an amada pega 357 with fanuc 04p control. We have had lots of issues and this machine is new to us. I need some help. Today when trying to run a program the machine just stopped and the clamps released. Ive tried to reset and do everything I know how but I cant get the clamps to close. The foot pedal has no response.

    I dont know my way around the machine well enough yet to even know what fuses, breakers, cords, etc to check. Can give me a list of items to check or troubleshooting procedure

    I did notice that usually when we power on the machine the control usually comes on, then the hydraulic, then there is a multiple clicking sound that I believe may have been the clamps, after the clamps stopped working that sound no longer happens.

    please help. Ill even pay for tech support if someone can offer it and truely knows this machine.

    email or text

    618-709-9262

    [email protected]

  14. #14
    Join Date
    May 2016
    Posts
    14

    Re: Amada pega fanuc 04pc system error

    Hello!

    Can you please send me Diagnostic parameters for Amada Pega 345 Fanuc 04pc controller to my jayratio at gmail . com

    That will be a great help.

    Thanks,

    Ajay

  15. #15
    Join Date
    Dec 2013
    Posts
    39

    Re: Amada pega fanuc 04pc system error

    Dear Jai
    Download it from here
    CNC Manuals: Fanuc Manuals Part2 - CNC Manual

  16. #16
    Join Date
    May 2016
    Posts
    14

    Re: Amada pega fanuc 04pc system error

    Hi !

    Thank you for referring that link, but that does not contain Parameters or Diagnostics for Amada Pega 345 Queen with Fanuc 04PC Controller.

    Regards,

    Ajay

  17. #17
    Join Date
    Dec 2013
    Posts
    39

    Re: Amada pega fanuc 04pc system error

    Is it turret punch ? or

  18. #18
    Join Date
    May 2016
    Posts
    14

    Re: Amada pega fanuc 04pc system error

    Yes, it is Turret Punch with 58 stations and 2 auto index. 6L C Servo motor.

  19. #19
    Join Date
    Oct 2005
    Posts
    89

    Re: Amada pega fanuc 04pc system error

    hi jay,
    what exactly is the problem with your machine...?

    let me know..

    thanks.

  20. #20
    Join Date
    May 2016
    Posts
    14

    Re: Amada pega fanuc 04pc system error

    Hello Pitre,

    Everything is in order now, only one problem, x is 1mm under travel, mean I have to add 1mm to achieve desired position.

    Hope you can help me resolve it.

    Thanks,

    Ajay

Page 1 of 3 123

Similar Threads

  1. Pega 344 Amada Fanuc 6M electrical diagram
    By nguyenthanhthi in forum Fanuc
    Replies: 17
    Last Post: 02-07-2024, 10:12 AM
  2. Replies: 5
    Last Post: 12-22-2019, 03:46 PM
  3. Replies: 2
    Last Post: 09-29-2015, 04:02 PM
  4. Replies: 10
    Last Post: 08-10-2011, 10:14 PM
  5. Amada w/Fanuc 04PC ocsillation at stop
    By Mister NCT in forum Fanuc
    Replies: 2
    Last Post: 06-10-2011, 04:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •