585,942 active members*
3,214 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Syil Products > syil xp5 trigger limit switch

Thread: syil xp5 trigger limit switch

Results 1 to 4 of 4
  1. 10-26-2010, 09:44 AM #1
    Vik
    Vik is offline Registered
    Join Date
    Nov 2009
    Posts
    12

    syil xp5 trigger limit switch

    hello
    I have a syil xp5 linear. I had to take the machine into parts because of clearane in the z-spindel and some other mecanical problems with the y-axis.

    I have now limit switch trigger during runnig a program in mach3 and need some idea how to trace the error. It is always in different nc-records. The machine and spinel stops. I supose it is some electrical problem. If somebody had some similar problem thanks for a reply.
    Reply With Quote Reply With Quote
  2. 10-28-2010, 11:42 PM #2
    PEU
    PEU is offline Registered
    Send a message via ICQ to PEU Send a message via MSN to PEU
    Join Date
    May 2005
    Posts
    925
    it maybe a problem with the ground, check the back of the machine and veryfy the ground is OK. You can also try putting 500 as the debounce interval in the general settings it helps with noise.

    Good Luck!
    ● Distribuidor Syil en Argentina ● "www.syil.com.ar" ●
    Reply With Quote Reply With Quote
  3. 10-29-2010, 06:56 AM #3
    Vik
    Vik is offline Registered
    Join Date
    Nov 2009
    Posts
    12
    thank you peu
    where can i set the debounce interval. is this in mach3?
    Reply With Quote Reply With Quote
  4. 10-29-2010, 07:05 AM #4
    jeffrey001
    jeffrey001 is offline Banned
    Join Date
    May 2008
    Posts
    667
    Goto Config - General Config - and look at upper right corner for debounce interval

    Jeff
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Limit switch replacement with proximity switch?
    By Normsthename in forum Bending, Forging, Extrusion...
    Replies: 3
    Last Post: 07-11-2009, 04:38 PM
  2. Limit swtich false trigger
    By HakBot in forum Benchtop Machines
    Replies: 18
    Last Post: 10-04-2008, 07:01 AM
  3. 4th axis trigger off coolent switch?
    By D.D.Machine in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 10-10-2005, 09:04 PM
  4. Limit Switch / Home Switch in Software
    By Sanghera in forum CNC Machine Related Electronics
    Replies: 6
    Last Post: 11-02-2004, 12:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules