Need help identifying this instrument. It has no name plate but has Carl Zeiss on the removable parts. I bought this from a C/L sale but got no manual. The person I bought it from thought it was a optical comparator but from a pic I found of another instrument similar to this, but not exactly, I think it is a toolmakers microscope. Any help on identifying this and leading to a manual would be greatly appreciated.
Thanks,
Jack.
Results 1 to 3 of 3
-
10-31-2010, 05:50 PM #1
Registered
- Join Date
- Mar 2006
- Posts
- 55
Carl Zeiss Toolmakers microscope?
-
11-01-2010, 12:25 AM #2
Registered
- Join Date
- Apr 2005
- Posts
- 38
Sure looks like one! Is the box with the two knobs on it to position the X and Y stages? If so probably micron accuracy?
but no power 
Nice find if you need it.
Dave
-
11-01-2010, 03:32 PM #3
Registered
- Join Date
- Mar 2006
- Posts
- 55
Dave,
Thanks for the reply. The box to the left is the power supply. I don't need it but it will be nice to have once I figure out how to use it.
Was hoping someone here could shed some light.
Jack.
Reply With QuoteSimilar Threads
-
American ToolMakers
By qnet2 in forum Employment OpportunityReplies: 2Last Post: 07-02-2010, 09:08 PM -
Problem with toolmakers vise
By Thorpydo in forum Benchtop MachinesReplies: 25Last Post: 06-17-2010, 04:33 AM -
Zeiss GageMac - e-stop after reference
By AllDone in forum Calibration / MeasurementReplies: 0Last Post: 04-21-2008, 11:34 AM -
microscope project
By haku in forum Mechanical Calculations/Engineering DesignReplies: 3Last Post: 02-14-2007, 02:01 PM -
Precision toolmakers vise?
By ZipSnipe in forum MetalWork DiscussionReplies: 2Last Post: 05-31-2006, 05:29 AM
Posting Permissions
