585,898 active members*
5,077 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > cadet 4020 tool change problem

Thread: cadet 4020 tool change problem

Results 1 to 2 of 2
  1. 11-03-2010, 12:32 AM #1
    Hash01
    Hash01 is offline Registered
    Join Date
    Mar 2009
    Posts
    20

    cadet 4020 tool change problem

    Well I finally got my VAC III drive up and running thanks for all the help you guys were, I really appreciate it. My problem now is when I got fired up the carosole had drifted out and the shot pin wasn't holding position any more. I pushed the toolchanger off the limit switch but can't seem to regain position. The main problem seems to be the shot pin not actuating properly. Does any body have an idea. The alarm I am getting currently is 168 B.
    Reply With Quote Reply With Quote
  2. 11-18-2010, 08:54 AM #2
    Algirdas
    Algirdas is offline Member
    Join Date
    Mar 2009
    Posts
    1982
    is it just "168 B" or there is more on this message?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. 4020 Tool Release Problem
    By Applied in forum Fadal
    Replies: 3
    Last Post: 09-28-2010, 04:24 PM
  2. ATC Sequence problem Cadet 4020
    By mbm in forum Okuma
    Replies: 2
    Last Post: 04-03-2010, 07:35 PM
  3. Okuma cadet mate 4020 -OSP700M 1999
    By Taehk in forum Okuma
    Replies: 2
    Last Post: 06-21-2009, 03:23 PM
  4. 4020 Won't raise Z to allow tool change!!
    By john-john in forum Fadal
    Replies: 8
    Last Post: 05-16-2008, 06:53 PM
  5. Fadal 4020 Z axis tool change failure
    By ssurfview in forum Fadal
    Replies: 1
    Last Post: 05-15-2008, 12:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules