584,805 active members*
4,987 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > HURCO > Hurco VM10U w/WinMax 8 -- Need Mastercam X4MU3 Post Processor
Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2010
    Posts
    0

    Hurco VM10U w/WinMax 8 -- Need Mastercam X4MU3 Post Processor

    I have a VM10U w/WinMax 8. I'm using ISO standard C axis and absolute tool length measurement.

    Does anyone have a post processor that will work with MasterCam X4MU3?

    In-house solutions has been screwing-up my post for six weeks now. I'm about to give up.

    What's up with Mastercam and post processors anyway? It's always a nightmare.

  2. #2
    Join Date
    Jul 2010
    Posts
    492
    i use a post processor i found on this site. used it with x2 and now x3. My machine is the vmx42. it works slick for the most part, could tweak it just a little to my personal likings but its not needed. the one from our vendor kept wanting to drill up, as well as a few other issues...

  3. #3
    Join Date
    Nov 2010
    Posts
    0
    Quote Originally Posted by Shane123 View Post
    i use a post processor i found on this site. used it with x2 and now x3. My machine is the vmx42. it works slick for the most part, could tweak it just a little to my personal likings but its not needed. the one from our vendor kept wanting to drill up, as well as a few other issues...
    Is that a vector post? I thought a VMX42 was a B-C table and I have an A-C table. Are they compatible?

  4. #4
    Join Date
    Jul 2010
    Posts
    492
    dont know, sorry.

  5. #5
    Join Date
    Feb 2008
    Posts
    48

    Wink

    Contact Hurco APplications Support, they should be able to assist in this effort.

    317-293-5309

Similar Threads

  1. post processor for hurco
    By macdaddy60 in forum HURCO
    Replies: 6
    Last Post: 11-22-2013, 12:42 AM
  2. hurco VM10U 5 axis processor
    By timf in forum EdgeCam
    Replies: 1
    Last Post: 04-01-2010, 09:31 PM
  3. cam software with hurco post processor
    By Mag Man in forum HURCO
    Replies: 4
    Last Post: 07-26-2009, 05:05 AM
  4. post processor edit for hurco ncpp option
    By dannystooblue in forum HURCO
    Replies: 4
    Last Post: 04-09-2008, 03:50 AM
  5. Need MastercamX post processor for Hurco KMBX-1
    By zeeshan.insight in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 05-18-2007, 04:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •