We just got a new (to us) Mori Seiki CL20 this one has the 21TB fanuc controller in it.
I have a RFQ to our dealer for a full manual set but that may be a couple days before i receive the quote and manuals ..

So in the mean time I was going to see if anybody had ideas regarding our issues. Upon Booting up we have two 414 errors on both Z and Y axis "Servo Alarm _ axis detect Error"

Talking to a Fanuc Rep they said the 414 is caused by error code 1 displayed on the front LED of the Fanuc Servo Amplifier Module(A06B-6079-H207#em). the "1" is a Fan alarm and if replacing the fan doesnt fix it, replace the Servo Amplifier Module. they told me there were 2 fans inside this thing but i have it in several peices and there is only one fan hookup present.. so i dont think the likely hood of the fan replacement will resolve the 414 or the 1.


On Start up there is also a Mori Seiki specific message of EX1061 "Motor Interruption is abnormal"


I appreciate any help or ideas!