Hello everybody.
It there somebody who can help me with programing Tornos ENC 167.
I need to know how to program synchronization S1 and S2 spindles in angular position during cutting off. I know that is necessary to use command G355 but I do not know how. My programming manual is not complete and just this part is missing.

I need to cut off the part so that I could continue in position of C axis in sub spindle.
I have to drill some cross holes in spindle S1 and then continue to drill next holes in sub spindle. The problem is that all holes has to be position in accurate angle.

Thanks in advance

Dali

Operating system : FANUC 16 TB
year of production 1998