[mcphebb]

Hello,
We have a Koike Aronson DC510 Plasma Machine with a Linatrol Northrop Grumman D10 controller. We need to check the communication settings (baud rate, parity, etc.) on this D10 controller.

To access these settings:
AUX --> SETUP --> PASSWORD --> RS232 Link Setup

Does anyone know what the default SETUP Password is for Linatrol D10 controllers?

Thanks!
-Bob

[KoikeMktg]

Dear Bob,
Please contact our Technical Service Department at 1-800-252-5232, ext. 470, they may be able to better assist you with your question regarding the D10 Controller.

Thanks!
Koike Aronson, Inc./Ransome Staff
635 W Main Street
Arcade, NY 14009
Phone: 585-492-2400
Visit Us at KOIKE Group

"WE SERVICE WHAT WE SELL"

[KilroyNo1]

The setup password for my Burny 5 controller is SUPPOSED to be the last 4 numbers of the serial number on the controller in REVERSE. We found out that it was actually the first 4 numbers in forward order. You may want to try a combination such as that for your password.

[mcphebb]

KilroyNo1,
I appreciate the the information/suggestion... I will try both combinations when I get back in front of the machine.


Thanks!
-mcphebb

[rscamp]

6369?

[panozeng]

A D11 / picopath is 15732

[mcphebb]

We tried combinations of 4 digits of the D10 serial number (as KilroyNo1 suggested), without any luck.

We will try the other suggestions... hopefully something will work.

Thanks!
-Bob

[mcphebb]

The 6369 that rscamp suggested worked (as the setup password for our D10)!

Thanks Rob!!

:cheers:

-Bob