584,805 active members*
4,913 visitors online*
Register for free
Login
Results 1 to 5 of 5

Hybrid View

  1. #1
    Join Date
    Nov 2010
    Posts
    0

    Amada Press Brake

    We just bought a used Amada 12 Foot Press Brake RG170 ProneCam. We started off by bending .080 ALUM and it bent and cycled through fine but when we changed the program to run .050 ALUM it bent the part but wouldnt cycle through to the next bend but if you take the part out and press the pedel it cycles through with no problems. Could anyone help me with this?

  2. #2
    Join Date
    Jul 2007
    Posts
    10
    Look to see what your max tonnage is set to. It could be off

  3. #3
    Join Date
    Dec 2007
    Posts
    32
    If you cycle it through without material will it go forward.. How old is the brake

  4. #4
    Join Date
    Dec 2007
    Posts
    32
    Also make sure you are on foot pedal and not tooling on the key switch..

  5. #5
    MachineMfg Guest

    Re: Amada Press Brake

    You can refer to article titled Troubleshooting 56 Press Brake Bending Problems (With Analysis and Proved Solutions)

Similar Threads

  1. Converting Conventional Hydraulic Press Brake to CNC Press Brake with PC
    By aadityadengle in forum Uncategorised MetalWorking Machines
    Replies: 12
    Last Post: 08-13-2023, 05:23 PM
  2. Amada Press Brake Controller problem
    By jamesbond007 in forum Bending, Forging, Extrusion...
    Replies: 4
    Last Post: 12-29-2018, 03:38 AM
  3. Amada Pega 344 Punch Press Clutch/Brake Assy Breakdown
    By tony@sm-w in forum Community Club House
    Replies: 1
    Last Post: 03-15-2012, 12:16 AM
  4. Amada PRESS BRAKE HFT 220-3
    By M7MED in forum Bending, Forging, Extrusion...
    Replies: 4
    Last Post: 12-30-2011, 03:04 AM
  5. Amada brake press controller nc9 r
    By maplesiport in forum Controller & Computer Solutions
    Replies: 0
    Last Post: 07-15-2010, 11:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •