the active tool in not the same as the program tool number, and i need help setting tool zero offsets and i need help setting up to send program thru a
rs232 port thanks
the active tool in not the same as the program tool number, and i need help setting tool zero offsets and i need help setting up to send program thru a
rs232 port thanks
simply put your tool as 0101 or which ever pot you have it in. Zero offset would be determined by your settings of the material which is rather easy to do in most cam software.
I can elaborate further in email if you wish more help. RS232 is simply a cable between your computer and the data port on the CNC machine.