584,829 active members*
4,853 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2010
    Posts
    0

    almotion usbcnc

    is there a setting required to be able to use the DNC function on a TM-1?

  2. #2
    Join Date
    Nov 2007
    Posts
    69
    as per page 37 in the manual:
    "DNC is enabled using Parameter 57 bit 18 and Setting 55.
    Turn the parameter bit on (1) and change Setting 55 to On."

Similar Threads

  1. Replies: 9
    Last Post: 04-28-2016, 11:42 PM
  2. Vectric-PPs for USBCNC
    By elses in forum Post Processors
    Replies: 1
    Last Post: 11-04-2009, 11:24 PM
  3. postprocessor for USBCNC
    By Blerbaby in forum EdgeCam
    Replies: 3
    Last Post: 10-29-2009, 12:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •