584,857 active members*
4,060 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2010
    Posts
    0

    Accutex help!!

    I teach at a tech school with an Accutex Wire EDM. We have been having problems that we can't get solved. Accutex has good support but I'm looking for any additional help.
    1. We keep getting a 3011 reverse alarm. The wire keeps shorting on something. I'm teaching how to cut a helical gear, just using cold rolled, and it will not hardly cut. Is the cold rolled the problem.
    2. The tank fills up until it hits the float and then the water level will slowly drop until there is just an inch in the bottom of the tank.

    Any help will be greatly appreciated.

  2. #2
    Hey ytmboss... I operate and program two accutex machines...300i as well as a 500i... If u still having problems concerning accutex machines... Contact me.. [email protected]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •