VMC40 w/88HS control

Last night I used the RI command to clear the machines memory of everything, I then sent over a program. I'm 99.9% sure I was warming the spindle up after I sent the program over, but my compressor died on me so I called it quits.

Today I power up the machine, CS, and give it a S1000M3 to start warming up the spindle, but the spindle isn't running anywhere near 1,000rpm, it cant be spinning more then 100rpm. I program 10,000rpm and it looks as if its running around 1,000 rpm. I powered down the machine and powered it back up and it didn't help. Any ideas?