Members,
What parameter is used to define motor rotary encoder PPR in TNC 370
I want to change PPR from 500 to 1000 as new encoder has this.
Members,
What parameter is used to define motor rotary encoder PPR in TNC 370
I want to change PPR from 500 to 1000 as new encoder has this.
Hi there.
Hera are the parameters for you.
These shuould do it.
Jukka
MP331.0-3
Distance per number of signal periods out of MP332 Input: 0.001 to 99 999.999 [mm or °]
MP332.0-3
Number of signal periods in the distance from MP331 Input: 1 to 16 777 215