584,860 active members*
5,359 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2009
    Posts
    899

    Airco Miglite 100

    Finally after a few years of asking about this welder sitting under the bench and collecting dust in my dads shop I got him to let me take it home with me. Everything works and cant wait to get home with it this weekend. It will accept gas for MIG welding but I think I will just run flux wire on it since I have a smaller shop. Does anyone have any experience with this welder? I know the Airco company was bought out by Miller years ago and I cant find anything.

  2. #2
    Join Date
    May 2007
    Posts
    119
    Check with Esab they should have info on that welder

  3. #3
    Join Date
    Aug 2009
    Posts
    899
    Nope still nothing. I got it going tonight with some flux wire. I think I am just going to buy a bottle of argon so that I can weld aluminum with is since most of the stuff I work on is aluminum.

    Do they make an aluminum gas-less wire?

Similar Threads

  1. AIRCO Heliwelder IV
    By machinewbie in forum Welding Brazing Soldering Sealing
    Replies: 12
    Last Post: 03-06-2020, 02:56 PM
  2. Need parts for an old Airco Welder
    By JohnyWard in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 09-21-2010, 04:11 PM
  3. Schematic needed Airco Heliwelder V
    By tadream in forum Welding Brazing Soldering Sealing
    Replies: 0
    Last Post: 08-29-2009, 12:25 AM
  4. Airco 300 Heliwelder IV Need to know Proper wiring
    By NJwelder in forum Welding Brazing Soldering Sealing
    Replies: 2
    Last Post: 10-01-2008, 03:28 PM
  5. CNC Retrofit Plate burner Questions ( Airco Servograph )
    By Rebar Grove in forum Waterjet General Topics
    Replies: 16
    Last Post: 07-25-2007, 02:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •