Originally Posted by
ixoxi999
Dear Sir,
First of all, Thank you for your reading my e-mail.
I have 1 Miyano TSV-21. The control is Fanuc 0M-A. The problems are all about ATC.
When I command to change from tool 6 to 7 or 9 to 10. The machine work probably.
But when I want to change from tool 10 to 1. The ATC will not rotate to its proper tool's position. After that will occur ATC Alarm.
I need to set up the tool number but I don't know how to set it.
Can you provide me how to set it up?
Thank you again for your cooperation.
Best Regards