Dear Sir,

First of all, Thank you for your reading my e-mail.

I have 1 Miyano TSV-21. The control is Fanuc 0M-A. The problems are all about ATC.

When I command to change from tool 6 to 7 or 9 to 10. The machine work probably.

But when I want to change from tool 10 to 1. The ATC will not rotate to its proper tool's position. After that will occur ATC Alarm.

I need to set up the tool number but I don't know how to set it.

Can you provide me how to set it up?

Thank you again for your cooperation.

Best Regards