Hi folks,

I have just bought a used Gravograph AF5 cutter cginder - good condition and I'm well pleased with it. I used one before some 20 years ago! However it doesn't have a manual and it is missing the cutter 'location key'. I don't know if that is the correct term for the part but it is a small 'L' shaped device that slots into the moving cutter holder adjacent to the collet, and swivels around to allign the inside face of the cutter so that it is properly aligned in the collet.

Does anybody know where I can obtain one (I haven't tried Gravograph yet - suspecting they may be the most expensive!). Also I could do with a user manual which as I recal has some guidance on angles etc.

Any help much appreciated,

Regards,
Neil