[partsmkr]

We just got a new second hand machine in, MECTRON MTV-T351 its a drilling tapping maching with a very fast tool changer. (looks like the old burgmaster machings, tool turret mounted right in front of the spindle)
It has a Funuc Series 21i MB control.
I was hoping someone could post a simple example program for this control so I can right the post from surfcam. I guess if I just have the top safty line and the first few lines of a program should help me get started.

[fomaz]

Very small program, that I am using.
On my machine, I use sub programs 1001 to toolchange 1 and so on, so M98 P1008 is a toolchange for tool n 8.

%
O0901(CONE)

#1=60 (LARGURA)
#2=214 (COMPRIMENTO)



( ********* )
( CONE )
( ********* )

M98P1008
G00G43Z100H8

S1200M3

G0X-16Y[-#1-7]
G0Z-3.75
M8
G1X[#2+16]F150
G0Z-2.82
X-16
Y[-#1-3]
G1X[#2+16]F150
M9
M5

G28Z100
G0X0Y200
M22
M30
%