[kosmo]

I was wondering if anyone has had any experience with cnc4pc C32 - Dual Port Multifunction CNC Board? I've been considering this along with gecko's or larken's cobra 10's to power the existing steppers on my Bridgeport Boss 4. Eventually this control will go to a 10' x 6' cnc plasma/router table and the Bridgeport will get a servo face lift. Been busy cleaning and salvaging parts for the build and getting familiar with Mach 3. Any input is appreciated !

[Dr Doofensmirtz]

CNC4PC products are nice. Plus, Arturo Duncan knows a lot about Mach 3.

Heinz D

[dirtdiggler]

I was wondering if anyone has had any experience with cnc4pc C32 - Dual Port Multifunction CNC Board? I've been considering this along with gecko's or larken's cobra 10's to power the existing steppers on my Bridgeport Boss 4. Eventually this control will go to a 10' x 6' cnc plasma/router table and the Bridgeport will get a servo face lift. Been busy cleaning and salvaging parts for the build and getting familiar with Mach 3. Any input is appreciated !

I use a C-23 board with a smooth stepper on my Boss 9 Series I and it works flawless. I had a few hickups with the SS but Arturo helped me out quite a bit. He knows his products and stand behind them 100% The C-32 board looks like the next generation, so I'm sure it's excellent. I also use Larken vipers which work awesome. Larken makes quality hardware.