[laka]

Anyone have a drawing of a SL40 turret from a Haas manual that shows the exact dimensions of where a toolblock bolts on?

[KenFoulks]

Hope this is what you are looking for.

[laka]

Thanks for that!

Any idea on what the overall length is from front face to back? and most importantly how much clearance there is from the back face to the turret main body?

[KenFoulks]

4.73 width and I will go out and measure an SL-40 later today.

[laka]

Thanks Ken

[KenFoulks]

I measured the SL-40 in the shop and it is about 1 1/8" from the back of the turret to the closest piece of sheetmetal

[laka]

Great thanks, would you happen to have a boring bar toolblock for the machine to pull dimensions from? Reason for needing all the dimensions is that we need to make one in a rush for another shop. I guess the importand dimension would be for the 20mm slot in the block and the distance from the center of the bar to the turret? Maybe you
could email me? laka0(@)hotmail.com

[KenFoulks]

Haas sells BOT blocks for our turning centers:

CNC | Haas Automation, Inc. | SL-40 Options | Tooling |