Hi,

we're struggling with how to import ISO code to an old V.Alberti machine that uses CNC90 (V3.1).

Until now it's always been programmed directly on the control using the CNC90 software, but we can prepare g-code files from a CAM program and want to take those files to the machine.

We think we might be missing a program called "import.exe" (and also a file called "import.lng" if we want to see instructions in a language different to Italian) that would let us import ISO files and compile them within CNC90.

Alternatively we've seen it's possible to make a bunch of files and folders ('Sorg' and 'Comp' are the main ones) and import an already compiled program to the CNC90.

It seems TensorCADCAM (Tensor | In dialoog met uw cnc machine) have a post-processor that makes the compiled program and the folders etc. ready for import whereas e.g. BobCAD offers a post-processor that makes the ISO file that needs to be imported to CNC90 and then compiled.

We'd be happy with either route - but we don't understand how to make the folders etc. for the compiled version or how to import the ISO code to CNC90.

Does anyone know how to do this? Thanks in advance if you do!